Tekneka 710 Coating Thickness Gauge

  • Range: 0 to 2000μm (0 to 78.7 mils)
  • Accuracy: ±(2.5% + 1μm)/±(2.5% + 0.39 mils)
  • Minimum Curvature Radius (Convex): 5mm
  • Minimum Curvature Radius (Concave): 25mm
  • Calibration: 1 to 4 points & ZERO point calibration
  • Display Resolution: 0.1μm (0 to 99.9μm)/1μm (≥100μm)

Tekneka 710 is a handy-sized coating thickness gauge used to measure magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum. This single/continuous measuring mode ranges from 0 to 2000μm. Using standard foils, it is easy to do calibration adjustments with four points/zero-point option. It has fast measurement and the best repeatability with high accuracy of measured results. Users can store up to 80 readings in each multiple-group mode and transfer the data through easy coating software. This software can facilitate users to measure real-time data and represents it in the form of listed values/graphs/bars. This coating thickness gauge is ideal for painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications.

  • LCD display with 128 x 128 dot matrix and backlight option
  • It comes with a single and continuous measuring mode
  • Very fast & best repeatability with high accuracy of measured results
  • Measures both Fe & NFe materials up to 2000μm
  • Accurate measurements on smooth, rough, thin, and curved surfaces
  • Users can perform zero-point calibration and multi-point calibration (up to 4 points)
  • Easy to recall the readings and delete specific readings
  • Comes with an alarm feature to set high/low limits for each general group
  • It can be interfaced with software for real-time measurement and data export
  • Statistics Display: mean, minimum, maximum, and standard deviation
  • General (GEN) mode helps the user to avoid data loss and store a maximum of 320 readings
  • PC interface through USB and data export in “.txt” format
  • Auto power off and low battery indicator
  • Display screen flipping feature enables a convenient view at any position

Widely used to Test Car Paints, Electroplating, Surface Technology, Pipelines Anti-Corrosion Coating, Chemical Equipment, Mechanical Equipment Surface Anti-Corrosion, Inspection, and Quality Control of products.

Packing Includes
  • 710 Coating Thickness Gauge
  • Standard Foils & Zero Plates
  • 2 x AAA Batteries
  • USB Cable
  • User Manual
Measuring Range (Fe & NFe) 0 to 2000μm (0 to 78.7 mils)
Accuracy ±(2.5% + 1μm)/±(2.5% + 0.39 mils)
Display Resolution 0.1μm (0 to 99.9μm)/1μm (≥100μm)
Units μm, mm, mils
Measuring Principle Fe: Magnetic Induction
NFe: Eddy Current
Calibration 1 to 4 points & ZERO point calibration
Precision Standard Foil Thickness 48, 98, 244, 494, 997μm (included)
Memory Range (4 Groups) Maximum 320 readings
Statistics Options No. of readings, Mean, Min, Max & Standard deviation
Measuring Area Ø20mm (minimum)
Minimum Curvature Radius (Convex) 5mm
Minimum Curvature Radius (Concave) 25mm
Alarm Higher/Lower limits
Measuring Rate Maximum 2 readings
Interface Download data via USB
Power Supply 2 x AAA 1.5V Alkaline battery
Operating Temperature -10 to 50°C (14 to 122°F)
Built Material Acrylonitrile Butadiene Styrene (ABS)
Device/Packing Dimension 144 x 53 x 25mm/Box: 24.5 x 19 x 5cm
Weight Net: 80g/Gross: 516g
Standard Compliance ISO 2178, 2360

Tekneka 710 Datasheet

  • 710……….Coating Thickness Gauge